Our
Solutions Engineering the world's toughest environments
Two complete solution families — Piping & Flow Control, and Composite & Structural Products — covering every corrosion-resistant industrial requirement from DN 25 FRP piping to ATEX Zone 1 GRP enclosures. Engineered for chemical, oil & gas, marine, water, desalination, and power industries.
Piping & Flow Control
Industrial-grade carbon steel, stainless steel, duplex, and alloy piping systems — pipes, fittings, flanges, lined valves, gaskets, and fasteners — manufactured and exported in compliance with ASTM, ASME, API, DIN/EN, and BS standards to meet the most demanding project specifications globally.
Seamless, ERW, LSAW, and SSAW pipes in Carbon Steel, Stainless Steel, Duplex/Super Duplex, and Copper alloys. Full size range NB ½″ to 60″, SCH 10 to XXS, in all pressure service ratings for oil & gas, chemical, and utility applications.
- ASTM A106 Gr.B/C · A53 · API 5L Gr.B to X80 (PSL1/PSL2)
- SS 304/316/321/347/904L · Duplex S31803 · Super Duplex S32750
- Sizes NB ½″ – 60″ · SCH 10 to XXS · SRL/DRL/Fixed lengths
- EN 10216 · DIN 1629 · BS 3601/3602 · ASME B36.10M/B36.19M
Complete range of butt weld, socket weld, and threaded fittings — elbows (45°/90° LR/SR), reducers (CON/ECC), tees, couplings, caps, crosses, unions, stub ends, and olets — in all MOCs for high-pressure corrosive service.
- ASTM A234 WPB / A403 WP304/316 / A815 Duplex
- Butt weld NB ½″–48″ · SW/THD ½″–4″ · 3000#–9000#
- Elbows · Reducers · Tees · Caps · Couplings · Unions
- MSS SP-43 · MSS SP-83 · DIN 2615/2616 · EN 10253
Full range of flange types — Weld Neck, Slip-On, Blind, Socket Weld, Threaded, Lap Joint, Orifice, Spectacle Blind, Long Weld Neck — from NB ½″ to 60″, Class 150 to 2500#, in all body MOCs and face types (RF, FF, RTJ, T&G).
- ASTM A105 / A182 F304/316/321 / A350 LF2 / Duplex F51/F53
- WN · SO · Blind · SW · THD · LJ · Orifice · Spectacle Blind
- Class 150–2500# (B16.5) · Series A&B 26″–60″ (B16.47)
- RF · FF · RTJ · T&G · M&F face types
Corrosion-resistant lined valves for aggressive chemical service — PTFE lined ball valves, PFA lined ball valves, butterfly valves, globe valves, check valves, plug valves, and PP/PVDF lined types. WCB, CF8, CF8M, CF3M bodies. DN 15–300, PN 10/16, Class 150.
- PTFE · PFA · PP · PVDF lining — superior chemical resistance
- Ball · Butterfly · Globe · Check · Plug valve types
- WCB · CF8 · CF8M · CF3M body MOC options
- IP66 · API 598 shell & seat tested · Bubble-tight Class VI
Complete gasket range for all flange types and service conditions — Spiral Wound (SWG), Ring Type Joint (RTJ), Kammprofile, CAF/CNAF sheet, PTFE/ePTFE, flexible graphite, rubber/elastomer, and PTFE envelope gaskets — in all MOCs for high-pressure and corrosive service.
- Spiral Wound · RTJ Oval/Oct/BX/RX · Kammprofile
- CAF/CNAF · PTFE/ePTFE · Graphite · Rubber (NBR/EPDM/FKM)
- SS 304/316 · Duplex 2205/2507 · Inconel · Monel · Titanium
- TA-Luft · FDA · BAM O₂ · NACE MR0175 compliance
Complete fastener range for pressure flanges and industrial structures — stud bolts with heavy hex nuts (B7/L7/B8M), hex bolts and nuts (ISO 8.8/10.9/12.9), PTFE-coated, hot-dip galvanised, threaded rods, eye bolts, U-bolts, and coupling nuts — in SS, HT alloy, carbon steel, duplex, and brass.
- ASTM A193 B7/B7M/B8/B8M/L7 · A194 2H/8M · ISO 898 Cl.8.8–12.9
- PTFE/Xylan 1424 coated · Hot Dip Galv. (ASTM A153/ISO 1461)
- Stud bolts per ASME B16.5 chart · M6–M100 · ½″–4″
- NACE MR0175 (B7M/B8M) · EN 10204 3.1 certs
Composite & Structural
FRP/GRP composite products for structural, electrical, and cable management applications in corrosive industrial environments — FRP/GRP piping systems, walkway gratings, cable trays, electrical enclosures, canopies, and pultruded structural profiles in isophthalic, vinyl ester, epoxy, and phenolic resin systems.
Filament wound and hand lay-up FRP/GRP pipes, elbows, reducers, tees, stub ends, flanges, and caps — DN 25 to DN 1200, PN 6 to PN 25 — in isophthalic, vinyl ester, epoxy (GRE), and phenolic resins for chemical, oil & gas, water, desalination, and offshore service.
- Filament wound (±55° helical) · Hand lay-up for large bore
- ISO · Vinyl Ester · Epoxy GRE · Phenolic resin systems
- DN 25–DN 1200 · PN 6/10/16/25 · SN 1250–10000
- E-glass / ECR-glass · C-glass liner · UV gel coat outer
Moulded and pultruded FRP/GRP gratings for walkways, platforms, trench covers, stair treads, and drainage areas — with integrated anti-slip surface, fire retardant resin options (ASTM E84 Class I), and matching handrail, toe board, and fixing systems for complete walkway solutions.
- Moulded (25×25 / 38×38 / 50×50 mm) · Pultruded I-bar (25–100mm)
- ASTM E84 Class I · IEC 60332 · DIN 4102 B1 · IMO A.653
- Anti-slip gritted surface integral · R11/R13 per DIN 51130
- Yellow · Grey · Green · Black · Custom RAL · Panel 1220×3660mm
Ladder, perforated, solid bottom, channel, and wire mesh FRP/GRP cable trays — with matching covers, bends, tees, reducers, and support brackets — for permanent corrosion-free cable management in chemical, offshore, marine, water treatment, and power generation installations.
- Ladder · Perforated · Solid bottom · Channel · Wire mesh types
- Width 100–1200mm · Depth 50–150mm · Load Class A–D (IEC 61537)
- Complete fittings: 90° bends · Tees · Reducers · Brackets
- Non-conductive · Non-magnetic · IEC 60332-3 Cat.C fire rated
Standard junction boxes, ATEX Zone 1/2 certified enclosures, pull boxes, instrument enclosures, control panel housings, telecom cabinets, solar PV combiner boxes — IP65 to IP68, ATEX II 2G Ex-e IIC, NEMA 4X, in isophthalic, vinyl ester, and epoxy resins for all corrosive environments.
- IP65 / IP66 / IP67 / IP68 · IK08 / IK10 impact rated
- ATEX Zone 1 (Ex-e IIC) · IECEx · NEMA 4X · UL Listed
- 100×100mm to 2000×1500mm · Custom sizes available
- SS 316 hardware · EPDM gasket · UV-stable gel coat 30yr
Prefabricated FRP/GRP equipment canopies, walkway shelters, utility kiosks, meter boxes, and instrument shelters — single-skin and insulated sandwich panel construction — for protecting pumps, valves, instruments, and electrical panels from weather, UV, and chemical atmosphere.
- Single-skin · Insulated sandwich (PIR core) · Double-skin
- 600×600mm (pump shelter) to 6000×3000mm (walk-in)
- ASTM E84 Class I · IMO A.653 (phenolic) · FR rated
- Flat-pack supply for offshore/remote site — field assembled
Continuous pultruded GRP structural profiles — flat bar, angle, channel, I-beam, T-section, square/round tube, and structural grating — as a non-conductive, non-magnetic, corrosion-free alternative to structural steel in chemical, offshore, and electrical environments.
- Flat bar · Equal/unequal angle · C/U channel · I-beam · T-bar
- Tensile strength ≥240 MPa · ¼ weight of steel
- Non-conductive · Non-magnetic · No hot work to cut
- Lengths to 12m · ISO / VE resin · DIN 4102 B1 fire rated
Industries We Serve
Every product in both solution categories is specified, tested, and documented to meet the most demanding requirements of seven global industrial sectors — from chemical plant acid lines to offshore ATEX Zone 1 cable management.
Ready to specify the right solution for your project?
Send us your RFQ, Bill of Materials, or project specification. Our team reviews every technical enquiry personally — you will receive a substantive technical and commercial response within 24 business hours, supported by full documentation.
